Retrotec DM-2 DucTester setup for Codes Manuel d'utilisateur télécharger pdf

QG135 Page 1 of 2 rev-2012-08-29

QuickGuide

Setup DucTester gauge for Codes (referencing 2009 IECC)

● Press the [On/Off] key.

● Press [Exit] to get to

the main screen.

● Press [Setup].

● Press [▼] until “Device Setup” is highlighted.

● Press [Enter].

The screen will now display all of the different types

of equipment that can be used with the DM-2.

To eliminate Devices not relevant to

duct testing, follow the steps

outlined below.

● Scroll down the list of Devices, one by

one, by pressing [▼] .

● Select “No” for all Devices except “Retrotec DU200”.

Scroll down, one by one, and turn the other devices

to “No” by pressing [►].

● Now press [Exit] to return to the

“Setup” menu.

The gauge will now only display “Retrotec DU200”

on the main screen. If you want to use this gauge

for other Devices, select “Yes” for that Device on the

“Enable/Disable Device” menu.

Step 1: Setup for Device

Step 2: Setup Device Choices

This is what your gauge should look like before you begin

testing ducts. The following steps will show you how to

easily setup your gauge for duct testing to code

standards (the 2009 IECC - International Energy Conservation Code).

Code Required

Results

Correct Device

Range Congurations: It is recommended

to start on the Mid-Range Ring.

“No” means that the Device will not

display on main screen, “Yes” means

that it will display on the main screen.

www.retrotec.com Sales & Support: (855)738-7683 Internaonal: (604)732-0142 Made in Everson, WA USA

1 2

QuickGuide 1
Step 3: Setup Mode 2

Résumé du contenu

Page 1 - QuickGuide

QG135 Page 1 of 2 rev-2012-08-29QuickGuide Setup DucTester gauge for Codes (ref

Page 2 - Step 3: Setup Mode

Page 2 of 2 The “Mode Setup” allows you to select only the results needed for duct testing according to code (2009 IECC). Instead of doing

Commentaires sur ces manuels

Pas de commentaire

Retrotec DM-2 DucTester setup for Codes Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Instruments de mesure Retrotec DM-2 DucTester setup for Codes. Retrotec DM-2 DucTester setup for Codes User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de mesure Retrotec DM-2 DucTester setup for Codes